|
|
 |
| |
. |
|
Nano-Glo®
FA Fluorescent Pigments possess extremely fluorescent hue,
best tinting strength, board compatibility, excellent resistance to
strong solvents and bleed. They are especially recommended for
applications demanding in formulations and coatings where strong
solvents are used and where softening by heat and pressure may be a
problem. Therefore, they are mainly used in polar solvent systems,
especially in paints, PVC screen inks, and PVC plastisols that
contains cyclohexanone and other strong polar solvent systems. Also
they are useful in water based latex systems where long term
shelf-life is required.
. |
| |
|
Physical Properties & Chemical
Nature |
|
Product forms: |
Solid Dye
Solution in a Thermset Resin |
|
Specific Gravity (Density): |
1.36g/cm3 |
|
Average Particle Size: |
2.0-4.0μm
|
|
Decomposition Point: |
250≧ |
|
Oil
Absorption: |
＋50g/100g
pigment |
|
|
|
|
FA-11 Red Orange |
FA-07 Cerise |
|
FA-12 Green |
FA-17 Pink |
|
FA-13 Red |
FA-27 Rose |
|
FA-14 Orange |
FA-37 Rubin |
|
FA-15 Lemon Yellow |
FA-47 Violet |
|
FA-16 Orange Yellow |
FA-28 Blue |
.
|
|
Characteristics
of FA Series |
1. Superior Resistance to Solvent : Insoluble
in most common use solvent systems, e.g.
cyclohexanone, anhydrous alcohol, aromatics, acetate
esters, halogenated solvents, etc.
2. Ultra Fine Particle: Below 4μm fine
grinded particle size can prevent trouble of
clogging in screen mesh or plate cylinder and
mottling in printing.
|
|
|
|
| |
Certain metal ions are known to cause color changes
and loss of brightness with fluorescent colorants.
Studies have shown that plastic processing additives
containing "free" zinc, magnesium, calcium and iron
will cause deleterious color effects when used in a
plastic resin system containing FA pigment. If
a metal containing additive must be used, it should
be thoroughly tested to ensure the color stability
of the FA pigment.
|
|
|
| |
|
|
| |
The product
should be stored, handled and used in accordance with good industrial
hygiene practices and in conformity with legal regulations. |
| |
|
. |
| |
|
. |
| |
|
|
| |
All recommendations for use of our products, whether given by us in
writing, verbally, or to be implied form the results of tests carried
out by us are based on the current state of our knowledge.
Notwithstanding any such recommendations the Buyer shall remain
responsible for satisfying himself that the products FA supplied by us
are suitable for his intended process or purpose. Since we cannot
control the application, use or processing of the products, we cannot
accept responsibility therefore, The Buyer shall ensure that the
intended use of the products will not infringe any third party's
intellectual property rights. we warrant that our products are free from
defects in accordance with and subject to our general conditions of
supply
.
|
| |
Nanochemitek (Yangzhou) Corp. |
| |
Shanghai Export Liaison Office |
|
| |
sub-china@126.com
Victor Chen +86-21-33737287 |
|
