|
|
 |
| ¡¡ |
¡¡ |
¡¡
¡¡ |
Nano-Glo®
ZQ
Fluorescent Pigments offer formaldehyde free, lower mold plateout,
melt-in, best tinting strength, superior brightness, increased
plastic compatibility, fade resistant and excellent heat stability
in injection molded plastics when compared to other thermoplastic
fluorescent pigments commercially available. The maximum recommended
processing temperature can be as high as 280¡æ
.
. |
| ¡¡ |
|
Physical Properties & Chemical
Nature |
|
Product forms: |
Solid Dye
Solution in a Thermoplastic Resin |
|
Specific Gravity (Density): |
1.2g/cm3 |
|
Average Particle Size: |
¡Ü10¦Ìm
|
|
Softening Point: |
¡Ý130¡æ |
|
Decomposition Point: |
¡Ý200¡æ |
|
Minimum Processing Temperature: |
180¡æ |
|
|
|
|
ZQ-11 Pink |
ZQ-17 Yellow |
|
ZQ-12 Cerise |
ZQ-18 Green |
|
ZQ-13 Red |
ZQ-19 Blue |
|
ZQ-14 Red Orange |
ZQ-20 Lemon Yellow |
|
ZQ-15 Orange |
ZQ-21 Rose |
|
ZQ-16 Orange Yellow |
ZQ-22 Violet |
ZQ
Pigments are essentially non-toxic
and contain
no constituent heavy metals, safe to be applied in
finished product such as toys to
comply with currently available international
regulations (refer to note) on heavy metal
concentrations.
NOTE:
1. US ASTM F963:96a (4,3,5) Standard consumer
Safety Specification on Toy Safety.
2. EU European Standard on Safety of Toys,
EN71part
¢ó:1994(including
amendment
A1:2000)-Migration of Certain Elements.
¢ò.Certain
metal ions are known to cause color changes and loss
of brightness with fluorescent colorants. Studies
have shown that plastic processing additives
containing ¡°free¡± zinc, magnesium, calcium and iron
will cause deleterious color
effects when used in a plastic resin
system containing ZQ Pigment. If a metal
containing additive must be used, it should be
thoroughly tested to ensure the color stability of
the ZQ Pigment. |
|
|
|
|
Use in Plastics |
|
Polyethylene (PE,HD/LD) |
+ |
|
Polypropylene (PP) |
+ |
|
Polystyrene (PS) |
+ |
|
Polycarbonate (PC) |
+/- |
|
Polyyurethane (PU) |
+/- |
|
Polyvinylchloride (PVC flexible) |
+/- |
|
Polyamide (Nylon) |
+/- |
|
Polyester |
+/- |
|
Polymethylmethacrylate (PMMA) |
+/- |
|
Acrylonitrile-butadiene-styrene (ABS) |
+/- |
|
Remarks: |
|
+ :
Recommended |
|
+/- :
Recommended,
should be tested in individual resins |
|
| ¡¡ |
| ¡¡ |
|
¡¡ |
| ¡¡ |
The product
should be stored, handled and used in accordance with good industrial
hygiene practices and in conformity with legal regulations. |
| ¡¡ |
¡¡ |
. |
| ¡¡ |
¡¡ |
. |
| ¡¡ |
|
¡¡ |
| ¡¡ |
All
recommendations for use of our products, whether given by us in writing,
verbally, or to be implied form the results of tests carried out by us
are based on the current state of our knowledge.
Notwithstanding any such recommendations the Buyer shall remain
responsible for satisfying himself that the products as supplied by us
are suitable for his intended process or purpose. Since we cannot
control the application, use or processing of the products, we cannot
accept responsibility therefore, The Buyer shall ensure that the
intended use of the products will not infringe any third party's
intellectual property rights. we warrant that our products are free from
defects in accordance with and subject to our general conditions of
supply
.
|
| ¡¡ |
Nanochemitek (Yangzhou) Corp. |
| ¡¡ |
Shanghai Export Liaison Office |
¡¡ |
| ¡¡ |
sub-china@126.com
Victor Chen +86-21-33737287 |
¡¡ |
